High Temperature Resistant Ep Conveyor Belt for Hot Coke EPDM Rubber

Basic Info.

Model NO.	EP150
Specification	Width: 300-2300(mm)
Origin	Taizhou, Zhejiang
HS Code	4010120000
Production Capacity	1000000m/Day

Product Description

High temperature resistant EP conveyor belt for hot coke

Details of heat resistant EP conveyor belt :

Models:
Mode1: able to with stand the test temperature of less than 100°C, code S1
Mode2: able to with stand the test temperature of less than 125°C, code S2
Mode3: able to with stand the test temperature of less than 150°C, code S3
Mode4: able to with stand the test temperature of less than 175°C, code S4

Heat resistant conveyor belt is mainly used to transport high temperature materials, such as sintering ore, hot coke, clinker, hot casting and so on. According to the manifestation of the heat resistant belt breakage until to lose transportation ability and the heat resistant grading, we use EDPM or SBR as the covering layer rubber, and high modulus low shrinkage polyester or cotton canvas as the strong layer. It can use the heat resistant woven glass fabric between the cover rubber and the layers, so as to improve the working life of the heat resistant conveyor belt. We can make it into endless conveyor belt as per cllients' requirement.

The physical and mechanical properties of the heat resistant covering layer after tested should be in accordance with the following table:
Project		The type
		T1	T2	T3	T4
		Change the range
Hardness	Draw the intensity	20	20	20	20
	Maximum after wearing out	85
Draw the intensity	The minimum value Mpa after wearing out	12	10	5	5
	Performance rate of change /%	-25	-30	-40	-40
Break person who extend	Performance rate of change /%	-50	-50	-55	-55
	After aging rate of change /%	200	200	180	180

The heat resistance conveyor belt physical property of the cover rubber after heat test shall conform to the values specified in the table.

Item		type
		type I		type II		type III
		variable range
Hardness	Difference before and after ageing (IRHD)	±20
	Max. Value after ageing (IRHD)	85
Tensile strength	variable rate in performance <=	25		30		40
	Min. value after ageing Mpa	12		10		5
Rate of elongation at break	variable rate in performance% <=	50				55
	Min. value after ageing	200				180

The heat resistance conveyor belt abrasive wear of the cover rubber

Type Item level	Abrasive wear
	type I	type II	type III
First quality	0.8	1	1
accepts	1	1.2	1.2

The heat resistance conveyor belt layer to layer adhesion strength

Item	interlayer of cloth	cover layer and cloth interlayer
		Thickness of the cover layer ≤1.5mm	Thickness of the cover layer >1.5mm
The average value of the longitudinal specimen shall be no less than	3	2.2	2.6
The peak value of the longitudinal specimen	2	1.6	2.0

Pictures of heat resistant EP conveyor belt :

Inspetion Equipment

workshop
For more details,please inquiry us!

Polyester conveyor belt, (EP)
Nylon conveyor belt, (NN)
Cotton conveyor belt, (CC)
Chevron conveyor belt, (C5 C10 and C15)
Oil Resistance conveyor belt, (OR and MOR)
Hot Resistance conveyor belt, (HR)
Fire Resistance conveyor belt, (FR/PVC/PVG)
Heat Resistance conveyor belt, (OHR/ OFR)
Cold Resistance conveyor belts, (CR)
Endless belts

Conveyor roller, idler

Conveyor Pulley, frame,bracket etc